Hub HMC-5 2x USB-A, HDMI, SD/microSD, USB 3.2 Gen 1, PD 100W, 20cm USB-C cable HMC-5 (8595247906175) dock stacijas HDD adapteri

Entry:

1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male.Backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0.Compatible with Thunderbolt 3.USB connection port with type C (male) connector placed on a 20 cm long cable.

USB output:

2x SuperSpeed USB port, USB-A female connector.1x USB-C Power Delivery port (for charging only), USB-C female connector.Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).The USB-C hub can permanently support several external drives.Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the external wall charger).

HDMI out:

HDMI.HDMI A (F) female connector.Maximum supported resolution 4K / 4096 x 2160 @ 30Hz.Resolution WQHD 2560 x 1440 @ 60Hz max.Full HD resolution 1920 x 1080 at 60, 100, 120 Hz max.A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a USB-C port with Thunderbolt 3 support is required for proper video output support. We also require a suitable operating system. The video output function will not be available when these requirements are not met.Hot-Plug-Detect support.TMDS (Transition Minimized Differential Signaling) support.Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection).Audio up to eight LPCM channels, support for audio compression (AC-3, DTC) and HBR audio.Sampling rate up to 192kHz and 24-bit audio support - depends on source and destination devices, e.g. notebook/phone and TV/display/AV receiver.

Card reader - two slots:

Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro.

The reader supports the following flash card specifications:

SD 1.0/1.1 (SD - Secure Digital, up to 2GB).SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).Support SD 3.01 and SD Jukebox APP (CPRM function).Support Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) up to 104 MB/s.Support for ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) hardware functions.2 LUN - in file managers the reader is indicated as two disks.

Power Delivery:

Power Delivery 3.0 support - continuous power supply to the device from the network adapter via the USB-C hub.Maximum power supply via PD output USB-C hub 100W - 20V/5A.Notebook or phone with Power Delivery support from USB-C port and appropriate network PD adapter required.