AXAGON HUE-MSA 4x USB3.2 Gen 1 SWITCH hub, metal, micro USB power IN, 20cm USB-A cable dock stacijas HDD adapteri

Entry:

1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.USB connection port with type A male connector placed on a 20 cm long cable.

Exit:

4x SuperSpeed USB port, USB-A female csatlakozo.4x on/off switch with LED indicator.Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).

Characteristics:

Possibility to connect the device on the run thanks to Hot Plug support.Full Plug and Play support.Standby mode support.A quality shielded cable guarantees high communication speed and minimal unwanted interference.Hub power mode via USB cable (bus power):USB bus power is sufficient to connect a low-power USB device (mouse, keyboard, card reader, flash drive, etc.) or a self-powered device (printer, scanner, 3.5" external drive) to all four ports.In this power mode, the USB hub can also work simultaneously with up to two 2.5" magnetic external drives.Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 2A at 5V (depending on the capabilities of the computer's USB port).

Hub power mode via USB + external USB charger (self power):

Integrated micro USB connector for additional power to the hub.For additional power supply to the hub, you can use any wall charger for mobile devices (not included) with a micro USB connector (recommended charger output current min. 2A).In this power mode, the USB hub can operate up to 3 magnetic 2.5 external drives. This mode is recommended for connecting to smartphones and tablets.Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 2.6A at 5V (depending on the capabilities of the external wall charger).

Independent charging station mode without connection to a computer (charging hub):

With the connected computer turned off or not connected to the computer, the hub works with power via the USB wall charger as a separate USB charging hub. Simply connect a standard wall charger with a micro USB connector to the hub (micro USB input).Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the external wall charger).

OS support:

MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and newer (all 32- and 64-bit Windows OS versions supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and higher, Android all versions.

NOTE: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed and are not available.